Dayton 937-310-2272   
Cincinnati 513-258-0685   
Columbus 614-429-1181   
Facebook Google Maps Instagram
Two Brothers Pavers and Pools
Blog Archives

Paver Sealing, Repair and Restoration in Atlanta, GA

In many cases, restoring and sealing pavers can require more skill than the contractor who installed them. This is why we suggest working with Perfect Paver Co of Atlanta, who specializes in repair, cleaning and sealing of hardscapes like pavers and natural stone in the Metro Atlanta area. Unfortunately, in the hardscape industry, there aren’t any licensing requirements, building inspections or permits necessary for companies to install pavers or natural stone. In addition, hardscape companies require very little startup costs. The same goes for companies who offer paver repair and restoration. In fact, it’s likely less startup costs and less oversight in this part of the industry.

Perfect Paver Co of Atlanta

Most paver restoration companies start out as pressure washers, painters, handymen, etc. Homeowners struggling to find a company who can help them make necessary repairs to their paver or natural stone patio or driveway turn to other companies that they work with and ask if they’ll assist them, and there begins that company’s venture in to the world of paver restoration.

What we like about Perfect Paver Co of Atlanta, is the fact that before starting in restoration of hardscapes, they were installers of pavers and natural stones. They installed very high-end residential and commercial paver and natural stone projects some of which were in the millions of dollars. So they understand pavers. If you’re going to fix something, you first need to understand why it’s failing, what was done incorrectly and how to fix it.

Types of Paver Repairs

We’ve worked with Perfect Paver Co of Atlanta to perform all types of hardscape repairs. Including repairs to flagstone (dry laid and mortared), bluestone, limestone, travertine, concrete and brick pavers as well as repairs to paver walls, steps, columns and outdoor kitchens. Our motto is ‘Built to last’ and so is theirs. So our business goals align. In addition to paver repairs, Perfect Paver Co of Atlanta also specializes in paver sealing and natural stone sealing. We like their steam cleaning approach to cleaning pavers, which minimizes wear to the pavers during the cleaning process.

Service Areas:

Perfect Paver Co of Atlanta services all of Metro Atlanta including Buckhead, Buford, Alpharetta, Brookhaven, Sandy Springs, John’s Creek, Marietta, Roswell, Suwanee, Acworth, Cumming, Athens, East Cobb and surrounding areas around Atlanta, Georgia.

Visit Perfect Paver Co of Atlanta website: https://perfectpaverco.com/atlanta


What you can expect from a paver installation by Two Brothers Brick Paving

As the hardscape industry continues to grow and more and more companies are offering the installation of pavers, I thought it would be an appropriate topic to discuss what our installation consist of.  It’s been my experience that anytime I’ve hired a company that specializes in their field I’ve gotten the best possible result. When a company specializes in a service like paver or hardscape installation, they are likely more knowledgable and experienced than others that offer the same service along with many other services or products. If you compare this scenario to the medical field I’m sure that you can easily see my point.

I’ve struggled to comprehend how a company can successfully be a jack of all trades. Anyways, let me get back on track. You can read more about this topic in a recent article I wrote discussing the difference between a Landscaper and a Hardscaper.

I believe the installation of hardscapes especially interlocking pavers has been changing to be more accommodating to the new installer or the do-it-yourself installer. What I mean by this is, manufacturers want their product to appear easy to install no matter your experience level so that they can sell more product. Before long, these shortcut techniques become the standard among new companies in the industry. I recently read something that is a little comical but also helps make my point here called the Five Monkey Rule. It’s when people keep doing things the same way they’ve always done them because thats the way it was done when they got there. They don’t ask why they’re doing it that way they just know thats the way its always been done.

So, here are our paver installation methods and why.

Proper Excavation and Base Depth: We believe that a paver patio in our climate (Ohio) must be installed over an adequate gravel base to eliminate settling. We install a minimum 6″ limestone gravel base for patios and walkways and 10″-12″ for vehicular applications like driveways . We only use limestone 1/2″-3/4″ stone (know as limestone 411’s orProper paver edging installation304’s) with fines and refuse to use crushed concrete as our base material.   We also pay special attention to the compaction depth of our compaction equipment. Most vibratory plate compactors are only rated to compact about 2″-3″ of base depth at a time. If more is attempted, base below that 2″-3″ depth will not receive compaction and will more than likely settle over time.
We also excavate 6″-8″ beyond the perimeter of the patio so that spikes we use to hold our edging is hammered into a rock hard base rather than neighboring soil.

Geotextile Fabric: We view geotextile fabric as cheap insurance which is why we install it under every patio we build. Many people believe the fabric is installed under the pavers to prevent weeds from growing through the joints which isn’t the case at all. Most weeds that grow in the joints of pavers start by a seed being blown in and deposited into the sand in the joint. Putting fabric below the pavers will not prevent weeds from growing (I will discuss below how properly installed pavers don’t grow weeds). So what is the fabric for? We install geotextile fabric between our limestone base and the soil. It has a very high tensile strength and helps to strengthen the soil by acting as a bridge over soft spots. We found this video that shows the difference adding geotextile makes to soil.

High Quality Pavers: We recently picked up an existing paver patio not installed by us and installed a new paver patio for a customer. Although there were some issues with original installation, the main reason this customer wanted their pavers replaced was due to the pavers deteriorating and because the pavers had lost most of their color. There are many paver manufactures out there that cut corners so that the cost of their product appeals to a larger demographic like manufacturers that make pavers for big box stores. We like to work with companies that stick to what they do best, which is our business model. In the paver manufacturing world, there are paver manufacturers and then there are block (cinder block) manufacturers that also manufacture pavers. We do not buy pavers from block manufacturers. Instead we buy from companies like Unilock, that specialize in making hardscape products. We also work with manufactures that have procedures in place to eliminate or at least minimize efflorescence.

Proper Drainage: Proper drainage is probably one of the most underrated characteristics of a successful paver patio. When water sits stagnant on pavers without anywhere to go the following can happen:

  1. At a minimum, your pavers will never appear clean. Water traveling over pavers is usually transporting silt, dirt, shingle particles and a variety of other things you don’t want sitting on your patio. If the water has no where to go, the grime will just sit on your patio.
  2. When water doesn’t escape your patio it makes the sand in the joints stay damp which is a breading ground for weeds, moss and mildew.
  3. Stagnant water weakens the soil below the pavers, the gravel base and the sand bed potentially causing settling in the pavers.
  4. Poor drainage usually results in increased efflorescence.

proper paver slope

Bottom line is, you have to address how the water will get off the pavers. We do this by applying slope to the patio. At a minimum, we shoot for 1/4″ of fall in vertical distance per 1 foot of horizontal distance. In some instances where that can’t be achieved we decrease our slope to as low as 1/8″ per foot. See the diagram to the right. Often, if 1/4″ of slop or close to can’t be achieved, we consider installing drains in the patio and slope the patio to those drains. The drains can be connected to neighboring down spout pipes or drained out into the yard.

 Detail in Cuts: We put a tremendous amount of detail into the cuts we make for each paver patio. It’s typically how well the cuts in a patio look that gives a patio that “installed by an expert’ look. Here are just a couple examples of the cutting detail you will find on our projects

cut around a drain in pavers

miter cut pavers

 

 

 

 

 

 

 

 

 

 

Pave Tech paver edging with lip

Proper Edge Restraint and Installation: There is only one edge restraint we will use and that is PaveEdge made by PaveTech. This test proves that it is the best vs all other edge restraint options. In addition, this is the only edge restraint on the market that has a lip which slides underneath of the pavers. This lip seen in the diagram to the right helps prevent the edging from lifting away from the pavers.

Paver Sealer and Sand Stabilization: I recently wrote an article about polymeric sand vs regular sand with a joint stabilizing sealer that you can read to find out more about why we don’t use polymeric sand. Instead, we vibrate a course particle sand into the joints of the pavers filling the joints up and interlocking the pavers. We then use a product called Joint Stabilizing Sealer made by Surebond that will harden the sand in the joints to minimize weed growth, sand loss and insect invasion. In addition, since it’s a sealer it will help protect the pavers from stains and make the pavers easier to keep clean.

As you can see, we take what we do very seriously. If you’re interested in finding out more about us or if you would like to meet with us to discuss your project you can call us.


WE RECOMMEND: Perfect Paver Co – Paver Sealing | Jupiter + Palm Beach Gardens, FL

Perfect Paver Co of Palm Beach Gardens, FLIf you’re in need of paver repair, paver cleaning or paver sealing in Jupiter, West Palm Beach, Stuart, Port St Lucie, Hobe Sound, Jensen Beach, Vero Beach, Juno Beach, Lake Worth and surrounding areas, our sister company The Perfect Paver Co of Palm Beach Gardens, FL is amazing. If you’re unfamiliar with their innovative steam cleaning process, you’ll be blown away with how clean they can get your pavers.

The Perfect Paver Co of Palm Beach Gardens steam cleans and seals paver driveways, paver pool decks, paver patios – as well as travertine pavers and natural stone and commercial paver sealing. Their advanced, commercial grade paver sealers protect your pavers, turn you sand into polymeric sand and enhance the colors in your pavers.

Here are a couple of their paver restoration before and after pictures:

Paver Cleaning Jupiter FL

Paver Cleaning and Sealing Stuart Florida

Paver Cleaning and Sealing Jupiter FLContact information:

Perfect Paver Co of Palm Beach Gardens, FL
4440 PGA Boulevard, Suite 600-167
Palm Beach Gardens, FL 33410
United States
Phone: (561) 614-1277
Website: http://www.perfectpaverco.com/locations/palm-beach-gardens-fl/


WE RECOMMEND: PERFECT PAVER CO Paver Sealing in Naples, Bonita Springs and Ft Myers, FL

Paver Sealing Naples, FL

Perfect Paver Co of Southwest Florida

If you’re in need of natural stone or paver repair, paver cleaning or paver sealing in Naples, Bonita Springs, Ft Myers, Estero and surrounding areas, our sister company The Perfect Paver Co of Southwest Florida is amazing. If you’re unfamiliar with their innovative steam cleaning process, you’ll be blown away with how clean they can get your pavers and natural stone.

Perfect Paver Co of Southwest Florida is more than just your typical paver clean and seal company. They specialize in more of a complete restoration of pavers. This includes making necessary repairs, stripping and removing failed paver sealer, cleaning out the joints between the pavers to remove organic build up (organic buildup in the joints is the leading cause of mold growth on pavers), installing polymeric sand in the joints and sealing pavers and natural stone to enhance and protect.

Travertine Pavers

Travertine pavers have become extremely popular in Florida and they are a great choice for your pool deck. If you have travertine pavers, you’ve probably realized they come with some maintenance to keep them looking great.

Although travertine pavers don’t require sealing to keep them from losing their color or from surface deterioration, it is strongly suggested to seal your travertine pavers if they’re around a salt water pool. The salt in salt water pools can cause deterioration in the travertine over time. This can be very costly to fix.

In addition, sealing travertine makes it more difficult for mold to grow in the pores. The Perfect Paver Co also installs polymeric sand in to the joints of travertine, which will keep your pavers from becoming uneven. Empty joints in travertine pavers allow rain water from heavy rains to erode the sand setting bed beneath the pavers. Polymeric sand in the joints will prevent this from happening.

If you need your pavers sealed or repaired, please contact Perfect Paver Co of Southwest Florida today:

Perfect Paver Co of Southwest Florida

10600 Chevrolet Way
Suite 250-A
Estero, FL 33928
 
Phone: (239) 533-0035

Services We Provide:

* Paver Sealing

* Paver Restoration

* Paver Repair

* Paver Cleaning

* Polymeric Sand

* Travertine Sealing

* Travertine Repair

* Travertine Paver Restoration

 

Connect With Us Online:

Our Blog

YouTube

Yelp

BBB

Facebook

Gulf and Main Magazine

Google

Yahoo

Bing

Chamber of Commerce

Blogspot

Paver Sealing Naples, FL